, Filtered results: 132
Hose Pump Type SR 25. Due to Its unique design this pump is extremely durable and reliable,
The nCLD EL S is the next generation in single-channel NO/NOX measurement. Unique in speed and precision
The solution for simultaneously measured NO and NOx has got a name: CLD 822. The heated inlet copes with hot and humid gas samples no gas cooler required!
The Messenger is the electronics unit for up to 4 single-channel sensors. This may also be of different types. The measured values can mathematically linked and utilized.
The turbidity probe model 22E-LC uses the principle of light absorption to detect dissolved or suspended particles in liquids.
The ultrasonic probe model AS3, together with transmitter model AT3, has been specially designed to measure particle concentration in a variety of liquids.
The sensor model LAS uses the principle of light absorption to detect dissolved or
suspended particles in liquids.
The sensor model MoniSpec-AD uses the principle of dual channel light absorption to detect colour in liquids.
The universal transmitter model Messenger can be used with all optical sensors of the
Monitek series.
The turbidity sensor Model MoniTurb-F uses the principle of 12° forward scattered light to detect suspended particles in liquids.
The turbidity sensor Model MoniTurb-S uses the principle of 90° side scattered light to detect particles in liquids.
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .
Versatile , economical, multi- component NDIR + O2 analyzer for continuous measurement
The summit analyzer area for a wide variety of applications in highly corrosive and complex applications.
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas
The AULA-254 Gold is a fully automated system for analyzing traces of mercury in aqueous and digested samples
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory.
Gas analyzers with an FID (flame ionization detector) are well suited for the continuous total hydrocarbon measurement.
..Combinatie van de Ultramat 6 en Oxymat 6 meetsystemen in 1 19” behuizing tot een compacte plaatsbesparende oplossing voor meting van 2 NDIR componenten en zuurstof.
Sampling start with the sample take off point. If you have a colt spot, your measurements are worthless or your analysers can be damaged
The heated sample lines are manufactured according to the client’s specification and completely confectioned in the factory to a fixed le
The Ankersmid gas coolers series ACC ( Compressor system) and APC (Peltier system) are offering precision, safety and long-term stability for extractive analytical systems
Automatic condensate traps or condensate collectors out of different materials,.
Rota meters out of glass or Plexiglas with or without needle valve. Flow alarm
These liquid sensors are used in gas sample conditions/systems as security alarm in case of condensate break through.
Complete range of PVDF , PP , PTFE or Stainless Steel Connectors, fittings and manifolds
Complete integrated wall mounting system and 19”-compact conditioning units or portable conditioning systems in carrying case
The ASP gas sample probes are designed for continuous gas sampling in difficult processes with gases of high or low dust content, different temperatures and extreme humidity.
A significant advantage is that all filters are replaceable without dismounting the probe without using any tools and in the shortest possible time. Cleaning and exchanging of unheated sample tubes or preliminary top-filters can be affected by extracting the filter from the probe
Membrane pumps with rotative or linear motor, out of PTFE, Kynar PVDF or Stainless Steel
ANKERSMID Universal Condensate Separator
RVS condensaat afscheider om condensaat(vloeistof) te scheiden van verzadigd monstername gas
Universal filter with several filter elements, materials and enhancements such as moisture and alarm output
AWB Gaswas bottle. Available in different bottles. Optional: balls and drain connection options and alarm
Ankersmid aerosols / particulate filter liquid. Extremely fine filter for removing acid droplets / acid mist
A very small and extremely effective and durable filter.
Available in 0.1 microns and 2 μm
Available ot of PVDF or stainless steel.
This filter stores fully closed after fluid decisive.
Ankersmid Condensate Vessel
ACV
The ATC temperature controllers are modern microprocessor-based (PID) control devices, featuring easy handling and a digital display. The clear design of the operator control level facilitates fast and reliable adjustment.
These sample tubes are used in combination with the Ankersmid ASP probes in order to sample the gas in the optimal section of the gas-stream. For a typical installation of the probe-tip, a position in the middle third of the gas stream is advised.
PTFE, PVDF, PP, Viton tubing, connectors, nipples, 2-way ball valves - 5-way ballvalves
‘ACF’ series
The stationary gas sample probe type ASP 100 is especially designed for low-budget projects with standard process and ambient conditions. The sample probe ensures safe and reliable operation as well as easy maintenance at a wide range of applications. The innovative construction and design guarantees a perfect operation for gas measurements.
The extension tube is placed between the probe insertiontube and the insertion tube and / or the pre-filter.
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes.
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases
Very low detection limits
ATEX and CSA certified
Short response time
Various gas / liquid filters
filters can be combined as well
The portable system is suitable for variable, discontinuous and continuous operation.
The ACM Control module for 19”-rack mounting is a modular system used as compact all-in-one device to monitor and control all gas sampling and gas conditioning equipment such as sample probe, cooler, sample line, pump and flow of gas media.
adsorption filter, catalysis various materials, available with various options such as liquid alarm
Gas coolers, which make use of the cooling capacity of the ambient temperature.
Stainless Steel fittings
(inches)
‘PFI’ series
Stainless Steel pipe fittings
‘PPF’ series
This unique microprocessor controlled Peltier Cooler APC 1403 has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C
Complete gas conditioning system for wall mounting.
The ASP gas sample probes are designed for continuous gas sampling in difficult processes with gases of high or low dust content, different temperatures and extreme humidity.
The well-proven ULTRAMAT 23 gas analyzer extended with an hydrogen sulfide (H2S) sensor
The Spark is the lowest cost CRDS analyzer on the market, offering powerful performance on a budget, plus the highest range (5 orders of magnitude!) and fastest speed of any Tiger analyzer! Available for detection of H2O and other molecules in a variety of matrices, the Spark is ideal for cylinder analysis in industrial and medical gases, and many other applications.
The CO-rekt allows the use of Tiger's powerful CRDS technology in harsh industrial environments. Outfitted with a purged enclosure, the CO-rekt meets Class I, Div 2 specifications for use as CO, H2O, CH4 and CO2 analyzer in SMR and HyCO processes, among others.
The HALO is our most versatile analyzer, with a perfect blend of high performance, compact footprint, and cost efficiency. The HALO is used to analyze an enormous variety of gases, including hydrides, fluorides, rare gases, and more.
The LaserTrace is our most powerful trace gas analyzer with detection limits as low as 50 ppt, capable of measuring four molecules at a time on up to four separate lines. The system is the semi industry standard to monitor H2O, CH4 and O2 in bulk gases, but is also available for many other molecules and applications.
The Prismatic 2 is a multi-species analyzer capable of monitoring up to four trace molecules in a single gas stream. It is an ideal solution for applications that require the simultaneous analysis of multiple analytes in real-time, for instance, quality control of fuel-cell grade hydrogen or monitoring of unmanned ASUs.
For environmental monitoring and analysis in ambient air, Tiger Optics packages Cavity Ring-Down Spectroscopy in the compact, watchful Tiger-i.
The ALOHA H2O series offers the world's best detection limits for moisture in ammonia (as low as 2 ppb). Ultra-pure ammonia is a critical building block for the manufacture of HB LEDs and for advanced GaN on Si devices.
Ankersmid Compressor Coolers are used to lower the dew point ofhumid gas to avoid condensate entering into the gas analyser
Tiger Optics’ Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop.
We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations.
The Ankersmid APA Series is a precise oxygen gauge for continuous monitoring purposes. The instrument is microprocessor controlled with self-diagnosis capability
atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems,
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser.
atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form.
atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use
The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today.
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area
The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3).
Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be.
Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument.
It can be used for measurement of the concentration of CO, CO2 and O2 in sample gases simultaneously.
Gasboard 3000 flue gas analyzer can be used for measurement of the concentration of up to 5 gases such as SO2, NO,CO, CO2 and O2 components in sample gases simultaneously
A complete wall-mounted biogas analysis system consists of a rack type biogas analyzer Gasboard-3200, metal case, and gas conditioning system
Gasboard 5020 emission gas analyzer can be used for measurement of the concentration of automobile emission gas CO, CO2, HC, O2 and NO
In industry, active environmental protection means effectively reducing or preventing pollutants and impacts on the environment
Perform routine water quality parameter measurements in your wastewater and drinking water
Get reliable, high performance conductivity measurements with the durable Thermo Scientific™ Orion™ 2002SS and 2002CC Conductivity Cells.
Continuously monitor oxygen across a wide variety of low and trace level ppb level applications with the Thermo Scientific™ Orion™ 1816DO Low-Level Dissolved Oxygen Analyzer
Get continuous online monitoring and control of steam cycle and boiler chemistry with the Thermo Scientific™ Orion™ 2117LL Low-Level Chloride Analyzer, for use with power generation applications requiring chloride measurement at trace levels.
Maximize up-time and keep your plant in pristine operation with the versatility and performance of the Thermo Scientific™ Orion™ 2109XP Fluoride Analyzer. It offers accuracy, reliability and ease of use to best meet the demands of your fluoride analysis.
Reduce operational costs while producing the highest purity steam with the Thermo Scientific™ Orion™ 2110XP Ammonia Analyzer. This analyzer provides continuous, direct and precise measurements for the control and optimization of boiler ammonia levels.
Concentration, NIR, VIS, UV & color measurement for both liquid and gas.
Process photometer for color and concentration measurements
Process photometer for UV measurement in gases and liquids
Process photometer for NIR measurement for concentration and trace water measurements
Industrial Turbidimeter for turbidity measurement in accordance with International Standard ISO7027:1999(E).
industrial Fluorescence and turbidity meter for the measurement of oil in water
The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
The Wobbe Index is actually the correct representation of the heating value of natural gas arriving, from the gas line, at the orifice where a burner is located.
It is not simply the BTU per cubic foot but rather the BTU per cubic foot divided by the square root of the specific gravity.
The COSA 9610™ is one of the latest instruments from COSA Xentaur for measuring Wobbe Index, BTU/Heating Value and CARI (Combustion Air Requirement Index).
The Cosa 9750 is a fast response Zero Emission calorimeter for the on-line monitoring of Wobbe Index (WI), Combustion Air Requirement Index (CARI) and Heating Value (HV). The COSA 9750 is based on the Residual Oxygen Method (ROM), thus avoiding the use of a flame.
COSA Xentaur introduces one of the first commercially available portable Optical Gas Calorimeters. After extensive development work, this instrument proudes the fastest spot check response in the industry; T90=15 seconds for Natural Gas and LPG.
The model AirSense reflects the latest development step within the series of our analyzers based on the technology of Ion-Molecule Reaction mass spectrometry (IMR-MS). This analyzer is the multi-purpose level model focusing applications for non limited gas components, highest flexibility and robustness all in one.
The CO2Sense has got a single Ion-Molecule Reaction (IMR-MS) mass spectrometer and is specially designed for monitoring of organic and inorganic impurities in CO2. The common specifications for CO2 quality for the food and beverages industry like ISBT and EIGA can be fulfilled with the CO2Sense.
The V&F MotoSense serves as a powerful tool to study organic HC as well as inorganic N and S gaseous emissions in raw exhaust gas and tail pipe by automotive and catalyst researchers. Fast gas response times of 20 msec and a high dynamic range of 1 to 104 enable detailed study of nonsteady processes.
The PETSense is an Ion-Molecule Reaction Mass Spectrometer (IMR-MS) for the purpose of ultra fast and exact identifcation of contaminated refillable PET bottles. The PETSense analyzer is a so callled "RefPET-Sniffer".
Online TOC Analyzer - TOCADERO One
Water analysis of the next generation
Total mercury emissions monitor in stack flue gases
Modular mercury stack gas monitor
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)
Automatic systemdesigned for continuous mercury monitoring in natural gas even in hazardous zones (ATEX, IEC-Ex)
Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants.
The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
The stationary Flame-Ionisation-Detector (FID) iFiD NMHC measures with its built in NMHC Cutter the methane concentration and parallel in a second channel also the THC
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring of 2 channels parallel
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
The DynamiQ-X NG2210 provides fast and accurate on-line monitoring of natural gas and delivers calorific values for composition control and custody transfer purposes.
The DynamiQ-X NG2210 provides fast and accurate on-line monitoring of natural gas and delivers calorific values for composition control and custody transfer purposes.
The micro Gas Chromatograph instrument is designed for continuous gas mixture monitoring in industrial process and factory automation applications.
The micro Gas Chromatograph instrument is designed for continuous gas mixture monitoring in industrial process and factory automation applications. It can be custom configured in hardware and software to optimize the application
The instrument is designed for continuous gas mixture monitoring in industrial process and factory automation applications. The DynamiQ-R has internal space for custom equipment.
Monitoring CO2 in the air
Green houses, ventilation systems for building and parking lot, CA (Controlled Atmosphere) storage facilities
Ankersmid Compressor Coolers are used to lower the dew point of humid gas to avoid condensate entering into the gas analyser
The compressor cooler series ACC 1xx offers precision, safety and long-term stability for extractive analytics. The very low gas dissolution rate is attained owing to the new cooler technology (Patents applied).
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2.
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and H2O.
Using a proven flame ionisation detector (FID), the analyzer HC51M measures ambient air hydrocarbons (THC, CH4, nmHC) in the range 0-1000 ppm.
Measures 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O . O2 is measured by a built-in SRM paramagnetic sensor